|
|
Post by hoops48197 on Jun 8, 2011 6:41:21 GMT -5
Purchased my Double Horse a few weeks ago, great for the price, easy to fly, seems to be durable, have had several mishaps, other then some adjustments and re-torque most of the screws, it can take a beating. However, the only thing I would say is not durable are the drive gears, being all plastic I have stripped out 2 of the 4 and need to replace these. One thing I would like to improve is the forward motion in a lite wind, anyone know of a better tail rotor motor/gear set or different tail blade that would help with this? Any other tips or tricks to assist this would be helpful
|
|
|
|
Post by charliebrown60 on Aug 24, 2011 14:18:53 GMT -5
I have the same problem. Was wondering if the motor was not powerful enough to run the back rotor.
|
|
|
|
Post by Stephen P on Mar 15, 2012 23:16:10 GMT -5
I hear u can go with a brushless motor for the back.
|
|
|
|
Post by borybosell on May 23, 2012 6:33:42 GMT -5
Purchased my Double Horse a few weeks ago, great for the price, easy to fly, seems to be durable, have had several mishaps, other then some adjustments and re-torque most of the screws, it can take a beating. However, the only thing I would say is not durable are the drive gears, being all plastic I have stripped out 2 of the 4 and need to replace these. One thing I would like to improve is the forward motion in a lite wind, anyone know of a better tail rotor motor/gear set or different tail blade that would help with this? Any other tips or tricks to assist this would be helpful I think Blade MSR Tail Rotor Motor is best for your double horse 9101 heli because It is very easy work and cheapest motor. It is comfortable for your heli. It is available on horizon hobby online store. |
|
|
|
Post by killbucket on Jul 19, 2012 4:30:12 GMT -5
I would not use any other parts in one of these Double Horse copters, because their PCB's are notoriously weak. It'll burn up for sure.
|
|
